267

America, Circa 1830

BUILDER'S HALF HULL MODEL OF AN AMERICAN MERCHANT BRIG

Built up in seven alternating pine lifts, with applied rudder post, keel and stem with a stump bowsprit. Bottom finished bright and the topsides finished black with yellow waist bands. Lifts held together with wedges that have not been fused or glued together, as is the case with the majority of surviving lift models.
Height 10.5". Length 42.5".
Condition: There has been some recent restoration work to the stem and bowsprit.

  • Provenance:
    Skinner Inc., Boston, February 2002, purchased by the Kelton Foundation.
    The Kelton Collection of Marine Art & Artifacts.

    This model is typical of those used in the design and construction of hundreds of New England-built merchant brigs of about 1820-1835. The vessel likely registered around 225-275 tons. The model's horizontal lifts are keyed together with tapered vertical tenons or toggles. The color scheme is authentic and contemporary.

Shipping Options

Invaluable Shipping

  • Expert Care packing and Shipping
  • Shipment Protection
  • Real-time tracking

Arrange your own

  • You will coordinate with us to arrange your own shipping

Local pickup

  • You will coordinate with us and arrange pick up time after payment.

Accepted Forms of Payment:

American Express, Discover, MasterCard, Money Order / Cashiers Check, Personal Check, Visa, Wire Transfer

April 29, 2021 9:30 AM EDT
East Dennis, MA, US

Eldred's

You agree to pay a buyer’s premium, as outlined below, and any applicable taxes and shipping.
Buyer's Premium
$0 - $499,999:
25.00%
$500,000+:
10.00%

View full terms and conditions

Bid Increments
From: To: Increments:
$0 $49 $5
$50 $99 $10
$100 $499 $25
$500 $999 $50
$1,000 $2,999 $100
$3,000 $4,999 $250
$5,000 $9,999 $500
$10,000 $29,999 $1,000
$30,000 $49,999 $2,500
$50,000 $99,999 $5,000
$100,000 + $10,000